Deutsch· English
VANC Flyer
CAM programming system (english)
3.2 MB

VANC - Mechanical and plant engineering

We offer an experienced and proven functionality in the field of multi-sided machining through our numerous users of machine and plant engineering. In addition to covering standard machining centres, we also offer solutions with up to five axes for machines with any parallel axes.

  • Independent of existing CAD data (sketches, 2D and 3D data)
  • Machine kinematics with any parallel axes (portal-BAZ, cross-bed machines)
  • Simple, fast and simulation-suitable tool description
  • High-quality post-processors
  • Simple, clear and smooth handling of large and complex components using Open-Cascade technology.
  • Integration of clamping equipment such as vices, clamps, tool holders etc.

Video: Machining center with different heads

Video: Collision detection and simulation




VANCTM- Post-processors

Parts with many operations and offset shifts can also be programmed clearly and reliably with our clearly laid out zero point handling.

The programmer can decide for themselves whether or not the zero point shift is calculated by the controller or controlled by VANC.

VANCTM supports the internal positioning and planning logics of the control which therefore leads to an optimum result in CAM and to short start-up times on the machine.

A simple adaptation of the programs on the machine is possible afterwards through the output of machine cycles for drilling and milling cycles.

Subsequent problems can be prevented during programming thanks to the machine simulation. In addition to machine simulation, clamping equipment and collision elements of any kind can be integrated and simulated.

Video: Collision detection and simulation